StereoPi Forum

My StereoPi v2 cannot connect to the monitor. After plugging in power via Type-C, the indicator light turns orange. However, when I connect it to the monitor using a Micro HDMI to HDMI 2.0 cable, the monitor shows no response.

Hello,

Here is the power-up video for the StereoPi 2.

If you're using the StereoPi V2 "black" edition, then:
- please check that you have the power jumper installed
- please check the "act" LED near the power jumper is blinking

For the "RED" edition, just check if the "ACT" LED is blinking.