stereoPi 无法连接到显示器
stereoPi 无法连接到显示器
My StereoPi v2 cannot connect to the monitor. After plugging in power via Type-C, the indicator light turns orange. However, when I connect it to the monitor using a Micro HDMI to HDMI 2.0 cable, the monitor shows no response.
-
Realizator
- Site Admin
- Posts: 938
- Joined: Tue Apr 16, 2019 9:23 am
- Contact:
Re: stereoPi 无法连接到显示器
Hello,
Here is the power-up video for the StereoPi 2.
If you're using the StereoPi V2 "black" edition, then:
- please check that you have the power jumper installed
- please check the "act" LED near the power jumper is blinking
For the "RED" edition, just check if the "ACT" LED is blinking.
Here is the power-up video for the StereoPi 2.
If you're using the StereoPi V2 "black" edition, then:
- please check that you have the power jumper installed
- please check the "act" LED near the power jumper is blinking
For the "RED" edition, just check if the "ACT" LED is blinking.
Eugene a.k.a. Realizator