StereoPi Forum

For the sake of posterity, I was able to figure out that 2880x1440 will not work unless 4k60 is enabled in the config file. After enabling and setting the correct hdmi_timings, my displays work correctly.

I've been working at this for a while and I've come up with some weird results.

My research led me to this rpi forum thread which was only moderately helpful at first due to the nature of the thread. However the last post in the thread did lead me towards some progress.

Long story short, I wasn't ...

Hello again, as mentioned in my other post, I'm having some trouble with my custom hdmi settings, and I've gotten to a point where I don't know what else I can do.

I was able to get my stereopi working to the point where I could edit and modify settings and whatnot, but since I got cm4108016 I've ...

Ok I am getting very confused now, heh

I decided to try the newest install of the SLP2 image, in an attempt to start over and see if I've missed anything. Instead of trying to configure it right off the bat, I wrote the image onto the PI and booted it as is. Sure enough, the Wifi access point ...

Just like he title says, I need to remove the ethernet port from my stereopi v2, mainly due to it being in the way of another component I'm trying to use in my project. (A bonnet for the 40 pins). I haven't done a lot of work on pcbs, but I think I'm pretty ok at soldering, but I don't know that I ...

Here's some pictures of what's going on:

what the display is outputting:
https://media.discordapp.net/attachments/1119394234508775434/1345457340236693554/20250301_130634.jpg?ex=67c49e4b&is=67c34ccb&hm=e9b1bf5689e37b0f932bc76026f2fb1b1c983f88cc09bc7085585eab904594e1&=&format=webp&width=1077&height ...

So I recently bought a cm4108016 to hopefully increase stability and future proof my project. It's only caused me problems.

I had the CM4 lite working just fine off of the SD card provided in the kit. However, when I tried to install the SLP image via Raspberri Pi imager, everything started to fall ...

I meant to update this last night when I was actually home and had access to everything, so apologies for no pictures.

Long story short, it works! Ready to burn the next bridge as I cross it haha.

A few interesting things to note though,


raspivid -3d sbs -w 1440 -h 720

When I stopped all ...

I'll have to check specifics when I get home, but here's what I know.


Could you please tell me:
1. Which version of the software you are using?

Can't say for 100% certainty, but I believe it's the latest available, as I bought the stereopi v2 kit from crowd supply only a few weeks ago, and I ...

Hello, I'm a total rookie in regards to raspberrypi, but I'm trying to learn so I can finish this project. I'm trying to create a custom vr/ar headset for a cosplay piece that needs video pass through due to visibility issues.

My issue is that the displays I got are not working quite right, there ...